Black PVC U Fender - 25mm x 28mm x 9mm Panel Gap (12m Coil) (PFU206)

This non-marking U fender is 25mm wide by 28mm high and fits onto a 9mm flange. It is supplied in a 12 metre coil. This fender is ideal for protecting your boat or other marine vessel from bumps or knocks in the event of impact. Although commonly used within the marine industry, this profile can be used in other industrial settings where you are looking for protection from bumps and impact. Unlike EPDM, this PVC fender is non-marking and will not leach colour onto your boat or other surface.

This profile is designed for DIY installation. To fit this section, locate the fender onto the flange and secure in place. You can then fasten through the underneath of the profile and into the flange using self-tapping screws or rivets. This profile is designed to fit a 9mm flange/edge.

We manufacture this product from high quality PVC which is a compound commonly used within marine and industrial environments. This product is around the same hardness (67° Shore A) as the rubber on a car tyre and has an operating temperature range between -20°C to +60°C.