Our 2 part waterproof contact adhesive is supplied in a 250ml tin with 9g curing agent. It is a quality, high performance neoprene adhesive which, when mixed with the curing agent, can bond a range of rubbers and rubber coated fabrics (eg neoprene, Hypalon, natural rubber etc) in marine, automotive and industrial environments.
Before applying our 2 part waterproof contact adhesive, all substates to be bonded should be abraded and solvent wiped. Surfaces should be clean, dry and free from dust, grease and other contaminates. To mix the adhesive, combine and thoroughly mix equal part quantities (eg ½ tin to ½ bottle) for around 3-4 minutes by hand. The mixed adhesive should not be used after 4 hours.
Apply one coat of adhesive to each surface and allow to dry for 10-20 minutes. Apply a second coat to each surface and allow to dry for a further 10-20 minutes until the solvent has evaporated but the adhesive remains tacky. Bring the two surfaces together and apply pressure by hand roller or pinching. Once the two surfaces have been brought into contact, they will create an immediate bond.