Jaguar XK Rubber For Door Hood Cantrail (DHC) Sponge Seal - BD4814 (SRS1910)

This sponge section is 17mm by 13mm and supplied by the linear metre. It is designed to be used as a door hood cantrail seal for a Jaguar XK (BD4875) but is suitable for other automotive or industrial applications. This section has a smooth outside skin so can provide a neat sealing solution for situations where the product will be visible.

It can be bonded onto most clean flat surfaces such as metal, wood and plastic. We recommend using a good quality contact adhesive such as S136 or A262 (available from our website).

We manufacture this product from high quality expanded EPDM which is a compressible material suitable for a wide range of applications. When compressed to approximately 30%, this section will create a good long-term watertight seal without risk of compression set. This material has a good modular resistance to most substances including most chemicals, UV, air and ozone but is not recommended in environments which may come into contact with oil or fuel. EPDM has an operating temperature range between -40°C to +120°C.