Self Adhesive Carrier (2.2m Length) (BS4115)

Our white brush seal carrier is designed to hold our carrier fit brush seals. The central keyway in the carrier allows for brush seals with a 4.8mm wide base. This product can be stuck onto a flat surface or inserted into an 8mm wide by 3.3mm deep groove. This item is sold in 2.2m lengths.

This product is supplied with a high quality adhesive backing which can be easily applied to most clean flat surfaces such as plastic, wood and metal by peeling off the backing paper and sticking in place. To avoid delamination or poor adhesion the surface must be clean, dry and free from any surface oils such as dirt or sawdust.

We manufacture this product from high quality PVC which is a compound suitable for a wide range of everyday and industrial applications. This material has a good resistance to most substances including most chemicals, oil, fuel, UV, air and ozone. This product is around the same hardness (67° Shore A) as the rubber on a car tyre and has an operating temperature range between -20°C to +60°C.