Triumph TR5 & Early TR6 Types (ATT1979)

This P rubber section is 23.9mm by 10.5mm and supplied by the linear metre. It is designed to be used on the Triumph TR5 and early Triumph TR6s. Although the primary use of this seal is within the Triumph automotive industry, the unique profile shape makes this section ideal for other classic or modern vehicles or bespoke industrial applications. 

The flange/tail length can be extended or thickened by bonding solid neoprene strip onto it using a good quality contact adhesive such as our A139 or A262 (available from our website). This profile can also be bonded onto most clean flat surfaces such as plastic, wood and metal. 

We manufacture this product from high quality EPDM which is a rubber compound suitable for a wide range of everyday and industrial applications. This material has a good modular resistance to most substances including most chemicals, UV, air and ozone but is not recommended in environments which may come into contact with oil or fuel. EPDM is around the same hardness (70° Shore A) as the rubber on a car tyre and has an operating temperature range between -40°C to +120°C.