MG TA/TF Type Bonnet Rest Rubber Seal (ATMG1963)

This rubber section is 31.2mm by 8.5mm and supplied by the linear metre. It is designed to be used as a bonnet rest rubber seal on a MG TA and MG TF. Although the primary use of this seal is within the MG automotive industry, the unique profile shape makes this section ideal for other vehicles (classic and modern) or bespoke industrial applications. 

It can be bonded onto most clean flat surfaces such as metal, wood and plastic. We recommend using a good quality adhesive such as S136 or A262 (available from our website). 

We manufacture this product from high quality EPDM which is a rubber compound suitable for a wide range of everyday and industrial applications. This material has a good modular resistance to most substances including most chemicals, UV, air and ozone but is not recommended in environments which may come into contact with oil or fuel. EPDM is around the same hardness (70° Shore A) as the rubber on a car tyre and has an operating temperature range between -40°C to +120°C.